IJOY ELITE PS2170 Problems - Vape Guide
ELITE PS2170 Upgrade operation
Find the upgrade program on your computer and load it. Upgrade software and firmware are in a same compressed package, every upgrade! program has a unique PID number, enter the corresponding product PID number and then click the Start button to upgrade.
After upgrading, unplug the USB data cable, install the battery and turn on, now you can experience the latest firmware version. (details please check the documentation after download the upgrade package)
How to charge by USB?
When the voltage is lower than 3.3V, the display will show "Low Battery”; then you need to charge the device, please connect the device through the USB cable to the computer or power adapter.1. in the charging process, the red light is bright, full power will go out
2. in the charging process, the battery voltage is lower than 3.2V, the device is turned off.
3. can not vape during charging
(If the device not be used for a long time, please charge every 30 to 60 days to make sure battery life)
Malfunction
Indication and Protection
PCB temperature overheat protection When the temperature of device is too high, the output will shut off automatically and the screen will display "PCBTOO HOT"
Low power alert:
PCB Atomizer short-circuit protection:
No Atomizer:
Low resistance protection:
When the resistance is lower than 0.06ohm, the OLED screen will display "OHMS TOO LOW".
When the resistance is higher than 3ohm, the OLED screen will display "OHMSTOO HIGH".
Warnings
1. Please read the manual carefully before use
2. Please do not keep the e-juice inside the atomizer if the device is not going to be used for a long period
3. Please take out of the battery from device when it's not used for a long time
No comments